Seldur Black is a high solids metallised floor polish with black pigmentation for use on black asphalt, rubber and sealed floors. Not suitable for unsealed wood, unsealed cork or laminate flooring.

A metallised polish for extreme strength and durability coupled with ease of removability. Produces a deep shine with excellent slip resistance. Responds brilliantly to all spray and burnishing techniques.

DIRECTIONS FOR USE:

Seldur Black must be applied to a clean grease free floor. Strip old polish with Selate then rinse thoroughly with clean water, allow floor to dry. Apply a thin even film of Seldur Black using a clean lint free mop or applicator. Apply a second coat when the first is dry (approximately 30 minutes). May be buffed as required to enhance gloss.

COVERAGE: 60 sq m per litre.

TECHNICAL:

Composition:   A blend of acrylic copolymers, resins and copolymer wax incorporating wetting agents and film forming aids in a stable water based emulsion form incorporating metal cross linking additives.
Appearance:   Translucent emulsion
Colour: Pigmented black
Viscosity: <10 cps
Density: 1.025
pH: 8.0 – 8.2
Activity: 18%
Fragrance: Characteristic, slightly sweet
Stability: 2 years in unopened container

Biodegradability: All surfactants contained in Selden Products meet the requirements of the EU Detergent Directive 2005 – 2004/648/EC. This requires all surfactants to break down both quickly and completely into harmless material such as CO2 and water.
Protect from freezing.